Machine Building

Products

Valves Ensure Flexible, Accurate Control for High-Precision Manufacturing

Valves Ensure Flexible, Accurate Control for High-Precision Manufacturing

New from Emerson is the AVENTICS Series 625 Sentronic Proportional Pressure Control Valves. With a control deviation of less than 0.5%, the new valves are designed to deliver highly accurate, electronic proportional pressure control and provide the flexibility needed to support sophisticated pneumatic control engineering applications.

13th May 2024

Solid, Cavity-Free Clamping Knobs from Rencol Components

Solid, Cavity-Free Clamping Knobs from Rencol Components

Rencol's new Model 39 PK solid lobe knobs have a solid, cavity-free construction for superior strength, durability, hygiene and ergonomics.

13th May 2024

Revolutionising measurements with customisable load cell measurement chain

Revolutionising measurements with customisable load cell measurement chain

New from HBK is the Load Cell Measurement Chain (LCMC), a customisable solution that allows users to tailor their measurement system to meet their individual needs, and install it according to the 'plug and play' principle.

9th May 2024

New PC 6 series connectors with screw connection

New PC 6 series connectors with screw connection

The Phoenix Contact range of PCB connectors for power electronics is being extended further. With the new PC 6 PCB connectors with screw connection, the classic connection technology is also available with enhanced touch protection for the new pin connector pattern.

9th May 2024

Non-contact point level sensor overcomes media ‘challenges’

Non-contact point level sensor overcomes media ‘challenges’

The PL240 non-contact point level sensor from Baumer is compact yet robust sensor that can be attached outside plastic or glass tanks (even with a wall thickness of up to 6mm). It can reliably detect point levels of water-based media thanks to compensating adherence.

9th May 2024

Automated identification of entire terminal strips in a single process step

Automated identification of entire terminal strips in a single process step

Time savings of up to 70 percent can be achieved with the Thermomark E.Vario thermal transfer roll printer from Phoenix Contact. The applicator is part of the new Thermomark E series. The modular system combines a powerful thermal transfer roll printer with four different applicators.

8th May 2024

New Ultrasonic sensors

New Ultrasonic sensors

Thanks to an adjustable sound cone and small dead zone, the new Leuze ultrasonic sensors of the 420B and 412B series can be used for many different applications.

3rd May 2024

All-in-one precision motion control solution from Mclennan

All-in-one precision motion control solution from Mclennan

New from Mclennan is a new range of 'captive rod' actuators - the latest additions by Danish motion controls designer and manufacturer JVL to its MIL series of electric linear actuators.

3rd May 2024

Pilz Automation Ltd Lenze Selection (a Division of Lenze Ltd) Mechan Controls Ltd SICK (UK) LTD Matara UK Ltd ABSSAC Ltd Heidenhain (GB) Ltd Moore International Ltd Aerotech Ltd Servo Components & Systems Ltd HARTING Ltd Top Hex Ltd Spelsberg Els UK Ltd Phoenix Contact Ltd PI (Physik Instrumente) Ltd Euchner (UK) Machinesafe Compliance Ltd Lenze Selection (a Division of Lenze Ltd) Kawasaki Robotics (UK) Ltd Procter Machine Safety Dold Industries Ltd AutomateUK Pilz Automation Ltd maxon Group Smartscan Ltd STOBER Drives Ltd AutomateUK Rittal Ltd FATH Components Ltd Leuze electronic Ltd Murrelektronik Ltd