MachineBuilding
px

Webinar highlights use of strain gauges to access component life

22 August 2017

HBM UKvisit website

 

Webinar highlights use of strain gauges to access component lifeLatest webinar from test and measurement specialist HBM will focus on the use of strain gauges in estimating component and material lifespan. ‘From Strain to Lifetime’ will take place on September 26 at 9am (GMT).

When it comes to obtaining strain measurements using strain gauges to access the life of materials or components, this is usually only the first step, says HBM. In this seminar, participants will learn how to measure strain and calculate the stress, how to sum-up loads with a rainbow matrix and how to estimate lifetime using a S-N curve. Presented live by HBM Product and Application Manager Jens Boersch, (pictured), this webinar will also explain how to simulate lifetime upfront with historic load data, whilst revealing some handy tips and tricks for your complete measurement chain.

From Strain to Lifetime’ takes a maximum of one hour and can easily be accessed at a later date or simply used as a refresher course. As an added benefit, all registered participants will receive a link to the webinar, via email, after the presentation. Spaces are limited and are available on a first come, first served basis. You can reserve your space by booking at www.hbm.com/en/6802/webinar-from-strain-to-lifetime.

 
© Copyright 2006-14 Damte Ltd.