MachineBuilding
px

Hermetic accelerometer in IP67 titanium enclosure

ETLG Inertial Aerosystemsvisit website

 

ETLG Inertial Aerosystems is announcing models 2240 (single axis) and 2480 (3-axis) MEMS variable capacitive accelerometers. The units are low-cost, integrated plug-and-play measurement devices in rugged, hermetically sealed titanium cases. They are suitable for zero-to-medium frequency commercial and industrial applications, and particularly where reliable performance, very low noise, and long-term stability are absolute requirements. The cases are rated IP 67; the connector is rated IP 61 and can meet IP 67 when sealed with a boot, sleeve, or heat shrink.

Each SDI 2240 and 2480 accelerometer features onboard voltage regulation and an internal voltage reference to eliminate the need for precision power supplies. They are relatively insensitive to temperature changes and gradients from –55 to +125degC. The case is easily mounted via two screws, adhesive, or by attaching a magnet.

Product features:

  • Low Noise: 10 μg/OHz (2g range)
  • –55 to +125degC operating temperature range
  • Rugged IP 67 hermetically sealed titanium case
  • Excellent long-term stability
  • +/-4V differential output or 0.5V to 4.5V single ended output
  • Flexible +8 to +32V DC power
  • Outputs support up to 2000 feet of detachable cable
  • Fully calibrated and serialised for traceability

For more information about these accelerometers please visit www.inertial.co.uk.

07 September 2017

ETLG Inertial Aerosystemsvisit website
See all stories for this company
 
© Copyright 2006-14 Damte Ltd.