MachineBuilding
px

Visual monitoring of surge protection

Phoenix Contact Ltdvisit website

 

Visual monitoring of surge protectionIn addition to the narrow protective devices in the Termitrab complete product range from Phoenix Contact which are just 3.5mm wide, versions with an overall width of 6mm featuring mechanical signalling are also available. Remote signalling sets, which are available as an option, monitor up to 40 protection modules.

A photoelectric barrier is used for monitoring. If a surge protective device fails as a result of an overload, the integrated disconnect device closes the remote tunnel at the corresponding protective device. The photoelectric barrier for remote signalling is interrupted. The error status is forwarded to subsequent systems via the receiver module and a floating relay contact. The advantage of visual monitoring is the easy installation. It does not involve elaborate programming or additional wiring of the protective devices.

More information about the Termitrab product range can be found at www.phoenixcontact.co.uk.

 
© Copyright 2006-14 Damte Ltd.