MIG/MAG welding package is easy to use

ESAB Group (UK) Ltdvisit website


MIG/MAG welding package is easy to useESAB is launching the OrigoMag L300 welding package for applications within general steel fabrication, vehicle and furniture manufacturing industries. The package consists of the OrigoMag L300 power source, OrigoFeed L302 or L304 wire feed unit, a connection set (1.7, 5.0 or 10m) and the MXLTM 340 welding torch.

The OrigoMag L300 is a 21 step-controlled power source for MIG/MAG welding. Electronically controlled feeding gives an accurate and stable arc, while the four-wheel feed mechanism provides positive and stable feeding combined with low wear on the wire. The two-wheel feeder mechanism is an economic alternative for wires up to 1.2mm diameter.

Wire feed speed, 2/4 stroke, creep start, spot welding, inching, gas purge and burnback time setting are made via the front panel of the OrigoFeed L304 feeder, giving a good overview of the settings. Voltage setting and inductance adjustments are made on the power source.

Extra versatility is provided by the three wire feed mounting options: counterbalance and mast, wheel kit or a suspension bracket.

The OrigoMag L300 can be equipped with V/A digital meter and transformer for CO2 heater and the OrigoMag L300 meets the most rigid safety standard with low voltage operations, complete with an overload device, to ensure the best possible protection.

© Copyright 2006-14 Damte Ltd.