MachineBuilding
px

Heavy-duty CC-Link I/O modules are sealed to IP67

CC-Link Partner Association - Europe (CLPA)visit website

 

Heavy-duty CC-Link I/O modules are sealed to IP67Balluff is launching a new range of CC-Link I/O modules with a view to meeting the increasing demand for CC-Link in Europe and the USA, as well as continued demand in Asia where CC-Link is the dominant open fieldbus standard. Across the world, over 7million CC-Link nodes have been installed worldwide to date, and this figure is growing by around one million new units per year, with Europe representing the fastest growing market.

Balluff's CC-Link I/O modules are designed for heavy-duty industrial environments and enable fast and reliable installation of distributed automation networks without the need for complex wiring and switchgear cabinets. Sensors and actuators - such as valve manifolds and other devices - are connected directly to the module with pre-assembled standard cables and communicate with a programmable logic controller (PLC) via the deterministic fieldbus network.

The I/O modules are certified by the CC-Link Partner Association (CLPA) and feature a robust design that combines simple, reliable M12 connector technology with vibration-proof electronics, including the CC-Link interface, all fully potted and enclosed in a sturdy die-cast zinc housing. The modules are very compact, measuring just 224mm long, 68mm wide and 30.9mm high, and are protected to IP67. This enables them to be used in challenging industrial environments, including areas where they will be exposed to dust, water, oil and mechanical stresses. Typical applications include machine tools, machining centres and manufacturing equipment in the automobile industry. The slim design with rounded corners saves space and also provides a good view of the generously-dimensioned labels for the connection terminals on the side.

In addition, the I/O modules have large coloured LED indicators for local diagnostics and an integrated display with two keys for easy configuration of the station address and the data transfer rate. Setting up the modules for operation just takes few key-presses. On start-up the display shows the unit's hardware and software version numbers; in operation it shows the current operating parameters. A key icon clearly indicates when data entry mode is active and the configured values are locked by the controller. This prevents operator errors and protects the connected systems and machinery against unauthorised access and abuse.

Other indicators for the general module functions and next to every input and output (I/O) provide information on current status and enable fast troubleshooting. Two additional LEDs in the display panel of the CC-Link I/O module are freely programmable via the I/O registers of a PLC and can be used to support users for a wide range of tasks, including installation, error warnings and preventive maintenance and service.

The new range encompasses four potted CC-Link I/O modules, each with different I/O combinations (16 inputs; eight outputs; 16 user-programmable inputs and outputs; eight inputs/eight outputs).

Follow the link for more information about Balluff's new CC-Link I/O modules.

01 July 2010

CC-Link Partner Association - Europe (CLPA)visit website
See all stories for this company
 
© Copyright 2006-14 Damte Ltd.