Impress Sensors & Systems is introducing the Simex SWE-73-L digital panel meter for machine builders, panel builders and systems integrators who need a low-cost, loop-powered digital panel meter. This device offers a very shallow installation depth and is suitable for in-line installation with current output sensors or where there is a need to view multiple process parameters quickly.
The SWE-73-L digital panel meter features an installation depth of just 78mm and a compact housing measuring just 72 x 36 x 77mm. It is available with an optional remote control unit for configuration and programming of the display. The meter has a single 4-20mA input for both signal and power. It can therefore be installed in line with a current sensor to display the output. Integral safety circuits protect the unit's electronics from overload.
Readings are displayed on a four-digit, red LED display. The 13mm high digits ensure that display results are easily readable. Configuration of the device can be carried out using an optional IR remote controller.
The freely scaleable digital indicator also offers peak value detection and so is able to display the maximum value of a sensor output over a given time period. An optional alarm output is also available, which means users can set up limits that trigger a beacon, sounder or other PLC event.
While the standard SWE-73-L is protected to IP40 (front side), an IP65 version is available with additional seals for the front panel.
For more information on the Simex SWE-73-L, call the sales department on +44 (0)118 981 7980 or visit the website at www.impress-sensors.co.uk.