The time needed to develop products for CC-Link IE Field networks can be reduced using the Seamless Message Protocol (SLMP) technology of CC-Link IE, the gigabit open industrial Ethernet network.
Typically most companies are considering hardware and software development when they plan new product development. This means two separate sets of development activities need to be undertaken, each with its own time and cost burdens. SLMP is a new approach that could potentially halve the time taken to bring a CC-Link IE Field product to market. CC-Link IE Field is the version of CC-Link IE that connects controllers to field devices at gigabit speeds.
The secret is to skip the hardware part completely and simply adapt an existing device. Since CC-Link IE Field is based on a standard Ethernet physical layer, the hardware development has effectively been completed on any product that already connects to an industrial Ethernet network. Hence the only part that remains is to implement the SLMP communications in software on the existing device. Once implemented, any Ethernet enabled product can communicate with other devices on a CC-Link IE Field network via a gateway device. Hence effectively any suitable existing device can be adapted to connect to the network, rather than having to develop something from scratch.
This means that now potentially any Ethernet device can connect to a CC-Link IE Field network. The pool of available devices is effectively only limited by the devices on the market. As well as standard industrial Ethernet devices such as HMI, PLCs, drives and other products, now more varied devices such as label printers, barcode readers and RFID systems can also connect.
John Browett, General Manager of the CC-Link Partner Association (CLPA) in Europe, says: “The basic idea is that you take an existing product with Ethernet connectivity (any type will do as long as it has sufficient processing capacity) and you implement the SLMP protocol on it in software. This allows the product to communicate in the same ‘language’ as that used on the CC-Link IE Field network. The product is then connected to the rest of the network via a gateway on the network.”
Simpler conformance testing
In addition to the hardware of the product remaining unchanged, and reduced development times being possible, a third benefit is that conformance testing requirements for the product are simpler, as only the software functions need to be tested.
SLMP is a simple client/server type protocol, and so can be easily implemented into firmware for 100Mbit/s Ethernet devices from third-party vendors and then connected to CC-Link IE field via an Ethernet adapter. Any device connected in this manner can then be accessed across the network. Similarly, the Ethernet-compatible device can then access all other devices connected to the CC-Link IE Field network.
Browett sums up: “We have third-party research that indicates CC-Link IE is the fastest growing industrial Ethernet protocol. Hence there is a significant opportunity available for companies looking to increase their business with this technology. SLMP makes this opportunity even easier to exploit by shortening the development time needed to bring a product to market. In fact, custom development is not even necessary, as an existing product can be adapted to support SLMP. And once a product is conformance tested, its manufacturer is able to take advantage of our Gateway to Asia programme in order to work with us to increase their business in this important global market.”
To learn more about Seamless Message Protocol (SLMP) please go to www.clpa-europe.com.