MachineBuilding
px

Type 1 lightning current arresters for a 400/690V network

Phoenix Contact Ltdvisit website

 

Type 1 lightning current arresters for a 400/690V networkPhoenix Contact’s new FLT-SEC-PLUS 440 type 1 lightning current arresters are specifically suitable for industrial and wind energy applications with 400/690V networks. They enable you to safely handle high lightning currents up to 35kA per position.

The protective devices feature Safe Energy Control (SEC) Technology, which safely prevents any line follow current via the spark gap used. The advantage of this is that the load of the entire installation is reduced to a minimum in the event of lightning. The compact design enables space-saving and flexible installation. A separate arrester backup fuse is therefore no longer needed for currents up to 400A.

These products also have high shock and vibration resistance. Sensitive downstream components are optimally protected due to the low voltage protection level. The requirements for temporary overvoltages (TOV) when used in IT systems are also satisfied.

An easy-to-read status indicator and the floating remote indication contact keep the user informed about the status of the product at all times. Recurring inspections of the protective devices are carried out quickly and easily with the Checkmaster 2 test device. The type 1 arresters are tested and certified as type 2 combination arresters.

Go to www.phoenixcontact.co.uk for further details about the FLT-SEC-PLUS 440 type 1 lightning current arresters.

 
© Copyright 2006-14 Damte Ltd.