MachineBuilding.net Technical Articles Archive
Archived Technical Articles
Optimised seals for wind turbine rotor, blade and tower bearings
Wind turbines must operate reliably in a diverse range of environmental conditions, both onshore and offshore. By optimising the bearing design, lubrication and sealing for wind turbine rotors, blades and tower, reliability and operating life are maximised, says Dr Steve Lacey, Engineering Manager at Schaeffler UK.
Specialised coatings improve enclosure performance
Specifying an enclosure for your application requires an understanding of the hazards that are likely to be encountered once installed, as well as the performance requirements that will be expected. Considerations such as tensile strength, security and ingress protection are relatively straightforward, and most well-manufactured enclosures should provide the necessary performance. But, how can an enclosure offer protection from extreme temperatures, electrical interference or any one of the thousands of other complications which can arise in industrial applications? Chris Lloyd, Spelsberg UK Managing Director, explains how specialised after-market coatings can enhance an enclosure’s performance in unexpected ways.
New opportunities and engineering services for machine builders
Jon Severn, editor of MachineBuilding.net, recently met John Renard, President of Cyient for the EMEA region, to find out what his company can offer UK machine builders.
Oil contamination is a major cause of machinery failure
Between 70 and 80 per cent of all hydraulic failures, which can lead to machinery failure, can be traced back to contaminated oil, according Bosch Rexroth
Industrial Ethernet connects systems, improves energy efficiency
The drive to improve energy management has become so urgent that efficient installation and reliable operation have become imperative. Fortunately, there are many well-publicised technologies available to help. Here John Browett, General Manager (Europe) of the CC-Link Partner Association (CLPA) explains how Industrial Ethernet is playing a key role in providing efficient and reliable solutions.
Explaining the Physical Agents Directive EMF 2013/35/EU
Paul Laidler, Business Director for Machinery Safety at TUV SUD Product Service, explains what machine builders need to know about the Physical Agents Directive EMF 2013/35/EU.
Safety networks: The route from zero accidents to zero risk
As global competition continues to increase, how can you meet ever more stringent safety standards and still optimise productivity? As John Browett of CLPA explains, modern safety networks can hold the key.
Mitsubishi’s M2M system opens up new world of communications
Machine-to-Machine (M2M) communications holds the key to a new paradigm of industrial automation and production. Jeremy Shinton, Product Manager – Business Solutions & Software for Mitsubishi Electric, explains how.