Atlas Copco helps ground stabilisation specialist save energy
Posted to News on 18th Mar 2016, 14:25

Atlas Copco helps ground stabilisation specialist save energy

Tensar International, a world leader in technology-driven systems for ground stabilisation and soil reinforcement, is predicted to save over 22,000 in annual energy costs and achieve a 141 tonne reduction in its carbon footprint after installing an energy efficient compressed air system from Atlas Copco.

Atlas Copco helps ground stabilisation specialist save energy

On reviewing the performance of the compressed air system at its Blackburn site in early 2015, Tensar saw an opportunity to improve productivity, reduce maintenance outage frequency and meet carbon reduction targets.

This was confirmed following an energy audit of the compressed air installation carried out by Atlas Copco, who identified the potential for significant energy savings. The audit recorded the annual electricity cost to run the existing compressed air system as just over 61,000. By comparison, the recommended replacement system's equivalent cost of consumption was about 39,000, representing an annual saving of over 22,000. In addition, the calculations revealed a significant potential carbon footprint reduction of 141 tonnes of CO2.

The new Atlas Copco installation comprises a GA 37 VSD FF full-feature rotary screw workplace compressor with integrated dryer, filter, ancillaries and Mk5 Elektronikon graphic controller that provides full performance monitoring. This VSD-driven machine supplies up to 185 cfm of 13 bar compressed air to match the variable demands of Tensar's manufacturing equipment.

The installation was completed with two fixed-speed GA 37 FF full-feature compressors, with each machine supplying up to 243cfm of compressed air at 7.4bar. For optimum performance and process optimisation, the combined compressed air system is centrally controlled by an ES41 unit programmed to match Tensar's shift working and workload requirements.

Commenting on his company's sustainability programme and the benefits of the new compressor installation, Joe Crane, Tensar International's plant engineering manager says: "The Atlas Copco system has brought a new level of reliability and energy saving opportunity to our manufacturing output. What's more it has enabled us to meet our commitment to significantly reduce our carbon footprint."

Go to www.atlascopco.co.uk/compressorsuk for further information about energy efficient compressed air systems from Atlas Copco.


Atlas Copco

Swallowdale Lane
HP2 7EA
UNITED KINGDOM

01442 261201

Bosch Rexroth ABSSAC Ltd Lenze Selection (a Division of Lenze Ltd) Mechan Controls Ltd Matara UK Ltd SICK (UK) LTD Kawasaki Robotics (UK) Ltd Pilz Automation Ltd Dold Industries Ltd Smartscan Ltd STOBER Drives Ltd FATH Components Ltd Aerotech Ltd Euchner (UK) maxon Group Machinesafe Compliance Ltd HARTING Ltd AutomateUK Procter Machine Safety Top Hex Ltd PI (Physik Instrumente) Ltd Servo Components & Systems Ltd Leuze electronic Ltd Murrelektronik Ltd Rittal Ltd Spelsberg Els UK Ltd Heidenhain (GB) Ltd Phoenix Contact Ltd Moore International Ltd AutomateUK Lenze Selection (a Division of Lenze Ltd)