Machine Building

Rockwell Automation to support Royal Mint’s precious metal recovery

Rockwell Automation is working with The Royal Mint to design, build, and commission a facility to safely recover valuable metals from electronic products.

24th August 2022

Robust inductives stop high-speed spindles ‘getting in a spin’

To maximise their efficiency and productivity, high-speed machining centres often include automated tool changers. When a drive-motor manufacturer needed a reliable and robust sensor to detect the position of a machine’s main spindle before initiating the tool-change sequence, it turned to Contrinex.

19th August 2022

Full speed ahead for a custom conversion

A vision for a customised camper van led Leigh McCarron to Minitec UK. Working together to Leigh realise his dream, Minitec advised on the choice of profile that would turn an old transporter vehicle into a customised ‘king of the road’ camper van.

17th August 2022

7th axis robot in a welding application

An Igus 7th axis on a collaborative robot working alongside staff at German screening machine manufacturer Rhewum is helping to increase the workspace from 1300 to 5500mm.

5th August 2022

Robust inductives position automotive workplace carriers on conveyor

An automotive manufacturer is relying extensively on the reliability of Contrinex’s robust and high-performance inductive sensors in the automated assembly of engines, where cylinder heads are transferred for mounting on the engine.

5th August 2022

Storage tank manufacturer expands using Kawasaki robots

Since the integration of its first Kawasaki robot, storage tank manufacturer Haase has not only been able to significantly optimise its production and efficiency, but also to support its sustained growth in many industries and international markets.

1st August 2022

Nidec Leroy-Somer delivers an efficient solution for large fan

When Danish ventilation fan manufacturer Novenco needed an electric motor to drive the largest fan in its ZerAx range, it turned to Nidec Leroy-Somer.

1st August 2022

Six-station robotic machine tending boosts productivity

When Naperville, USA-based industrial lead-acid battery manufacturer Battery Builders (BBI) decided to upgrade its facility, it seemed like an obvious choice to include its six-station COS (Cast-On-Strap) machine in those upgrades. It worked with robotic integrator MAC Engineering to install a Kawasaki large payload robot with a robotic cell consisting of six process stations.

26th July 2022

Automating the UDI laser marking process

TLM Laser’s Andy Toms looks at combining robotics with the laser marking process to achieve flexibility within a UDI compliance marking environment.

18th July 2022

Ensuring pump reliability in abrasive service

When a refinery was experiencing accelerated wear on its coke cutting jet pump, which was incurring significant costs with a mean time between failure (MTBF) of six to ten months, it turned to Sulzer.

18th July 2022