Dirak's 1-081SL Compression Latch offers a compression range of up to 12mm, which is claimed to be significantly greater than other compression latches on the market today. The compression range can be modified depending on the length of the cam. Standard cam heights are 22 and 28mm, with other cams available upon request.
Using a planetary gear for actuation gives significant compression at very low torque while ensuring strength and durability. The use of a roller at the end of the cam minimises the scrape damage to panels that is often caused by traditional cams, and also reduces the required closing force.
In addition, the 1-081SL Compression Latch incorporates two of Dirak's innovative technologies, D-SNAP Technology and Design Symmetry. D-SNAP Technology provides fast and simple installation without hardware or tools. All latch components are pre-assembled, making installation into sandwich-type panels easily accomplished from the front of the panel.
Design Symmetry allows the same latch to be installed on both right- and left-hand doors. The 180-degree rotation range of the cam gives flexibility in applications and reduces inventory. The latch can be actuated with standard inserts, double-bit 3 and 5mm and square 8mm, with others available on request. The latch also meets IP65 requirements for water and dust protection.
A range of features incorporate all the advantages of D-SNAP Technology into the 1-081SL Compression Latch, including:
Follow the link for more information about the 1-081SL Compression Latch and to download a PDF datasheet.