Harting's PE module for standard cable and larger cross-sections

The hinged frame of the Han Modular series already features two integrated PE connections for the 0.5-10mm ² cross-section range. The new connector means that cross-sections of between 10 and 35mm ² can now also be made using a pluggable PE module. This effectively means that special cables with reduced PE are no longer necessary, and inexpensive and globally available standard cables can be employed instead.

Kevin Canham, Product Manager at Harting Ltd., says: "We've seen great interest in Han-Modular from several engineers and project managers involved in off-shore wind who are looking for plug-&-play solutions that will reduce the time needed to install turbines. This addition allows the system to be used on much larger cables capable of carrying higher currents and therefore offers solutions to more of the issues faced in offshore installation projects."

The PE module is simply mounted in the hinged frame; due to its construction it creates a secure, electrically conductive connection from the PE contact to the hinged frame and the outer housing. The protective earth connection is pre-leading and complies with standard IEC 61984.

Harting's module is available in two different termination technologies, crimp and screw termination. The crimp version is suitable for applications in which the power contacts are currently crimped, and any crimping tools used with other Han-Modular connectors can still be used since the crimping zone is identical across the range. The version with axial screw termination has the advantage that no special tool is required, as termination can be performed using a 4mm hexagonal torque screwdriver.

Please follow the link for more information about Harting's new Han-Modular PE module.