Posted to News on 1st Sep 2015, 17:02
Mclennan's AMP stepper motor range expands
Mclennan is expanding its range of stepper motors from USA distribution partner Applied Motion Products Inc. (AMP) with new smaller sized high-torque stepper motors in NEMA frame sizes 8, 11 and 14 as well as a range of 400 full step per rev motors.
These new miniature stepper motors will suit motion automation applications such as medical and laboratory equipment, camera controls, pumps and consumer electronics where installed space is limited but high torque and precision positioning is essential. The new 0.9 degree stepper motors, featuring 400 full-steps or 800 half-steps per rev with normal stepper drives, will provide smoother and quieter performance than the standard 1.8 degree motors in applications where microstepping drives are considered too elaborate, not available or where a basic half step drive is already specified.
The new compact NEMA motors are all 2-phase, 4-lead bipolar connected and range from size 8 - about 20mm square - to size 14, which is around 35mm square. Through the range the motor length is from around 26 to 53mm with available holding torque from 1.5 to 18Ncm. The 0.9 degree motors are offered in NEMA frame sizes 14, 17 and 23.
Mclennan supply a complete range of compatible low-cost stepper drives and motion controls from AMP to complement the new motors, from the 2035 full and half step drive to the STR2 advanced microstepping drive which includes simple dip-switch parameter set-up and many features found on much more expensive drives.
Further information about the AMP stepper motors can be found at www.mclennan.co.uk.
