Milford launches model 216 manual impact riveter
Register now for MachineBuilding.North at The Concorde Centre, Manchester this April
X
IXON BV
Posted to News on 11th Mar 2007, 12:31

Milford launches model 216 manual impact riveter

Milford Fastening Systems, part of the Orbitform Group, is adding the Milford model 216 manual impact riveter to its range. The model 216 is well suited for pilot runs, intermittent assembly jobs, and as a back-up or rework riveter.

Milford launches model 216 manual impact riveter

It is supplied with the same high-quality (engineered to suit) tooling as Orbitform's high-production automatic riveters. Optional rivet holding jaws are available to assist in accurate positioning of the fastener prior to assembly.

Weighing just 23 lbs, the model 216 packs up to two tons of rivet setting force - transmitted via the same toggle mechanism used in much larger automatic riveters. Custom arm lengths and tooling options are available.

Product highlights

  • Rivet Capacity: 0.187in (4.75mm) dia x 1in (25.4mm) lg mild steel semi-tubular
  • Available with or without Jaws to hold and position the fastener prior to assembly
  • Stroke: 1.25in (31.2mm)
  • Throat Depth: 6in (152.4mm) standard
  • Dimensions: 4 x 8 x 14in (W x L x H)
  • Standard Tooling: (1) Rollset, (1) Driver (Jaws optional)


Orbitform

1600 Executive Drive
MI 49203
UNITED STATES

+1 517 787 9447

The Engineering Network Ltd Mechan Controls Ltd ABSSAC Ltd STOBER Drives Ltd Aerotech Ltd Rittal Ltd Lenze Selection (a Division of Lenze Ltd) Leuze electronic Ltd PI (Physik Instrumente) Ltd Heidenhain (GB) Ltd Euchner UK Ltd Procter Machine Safety Kawasaki Robotics (UK) Ltd KEB (UK) Ltd ifm electronic Limited Smartscan Ltd Micro Epsilon UK Limited
IXON BV