Mouser now offering Maxim Integrated's MAX2250xE transceivers

The Maxim MAX22500E and MAX22501E half-duplex transceivers provide flexible performance with +/-15V HBM electrostatic discharge (ESD) protection to suit a variety of applications. The devices offer a large receiver hysteresis of 250mV, which provides excellent electrical fast transient (EFT) robustness. The transceivers feature integrated hot-swap protection and a fail-safe receiver to ensure a logic-high on the receiver output when input signals are shorted or open for longer than 10¼s.

These transceivers are optimised for 100Mbps high-speed communication over 50m (or 50Mbps over 100m) in an operating temperature range of minus 40 to 125 degrees Celsius. Both transceivers feature a supply range of 3V to 5.5V as well as high receiver sensitivity and wide receiver bandwidth. Additionally, the MAX22500E transceiver includes a low-voltage logic supply down to 1.6V.

The MAX22500E transceiver features integrated pre-emphasis circuitry to allow engineers to extend cable length by up to 50 per cent and increase the data rate of reliable communication. The pre-emphasis feature also enables increased encoder resolution and reduced latency. In addition, by improving the signal integrity and robustness, system designers can achieve the same level of performance with lower-cost cables, thereby reducing overall system costs.

The transceivers are supported by the fully assembled and tested Maxim MAX22500E and MAX22501E evaluation kits, which can be used for standalone evaluation or connected to an RS-485/RS-422 network for in-system evaluation.

Follow the link to learn more about the MAX22500E and MAX22501E RS-485/RS-422 transceivers at Mouser.