No PC required: digiVIT standalone inductive sensor

digiVIT calibrates itself for the specific sensor connected, the sensor cable length and whatever conductive target material is used. What sets digiVIT apart from other digital inductive linear displacement sensors systems is that all set-up functions can be accessed through four pushbuttons on the front panel with no need for connection to a PC - making configuration faster and easier for position, vibration and proximity sensing applications that include parts sorting, process control, laboratory test, engine dynamics testing and condition monitoring.

Kaman offers a range of compatible probe models with common linear measurement ranges that have been characterised to work with an aluminium target but digiVIT will perform with virtually any manufacturer's inductive sensor on almost all conductive targets. Extension cables, calibration fixtures and spacers are also available from Ixthus as part of the digiVIT range.

The simple pushbutton guided set-up procedure can be configured for 2-, 6-, or 21-point linearity calibration. Simply put, digiVIT automatically detects the coil parameters of the target sensor and the built-in bridge balances the circuit - achieving optimum and repeatable performance for the calibration range and target material. Pushbutton temperature compensation and zeroing is also provided with equally simple set-up via the intuitive 4-button tactile keypad. All information is presented on an easy to read digital display that reveals percentage of full scale (default), or a choice of voltage or current output values. Analogue output options are selectable from 0-5V DC, 0-10V DC (default), +/- 5V DC, +/- 10V DC, 4-20mA and 0-20mA. An EtherNet port is also provided that may be used to read values and switch parameters over a network, such as the analogue output type.

For further information about the digiVIT precision inductive sensor system, please visit www.ixthus.co.uk.