PRI proximity probes fully integrated for improved reliability

Proximity probes play an important role in machine shaft vibration, position and speed measurements, providing operators critical information on the rotating plant dynamic performance and bearing condition. The PRI is well suited for these applications and offers the following benefits over existing probe systems on the market.

High reliability thanks to no external driver and tuned cable assemblies, whereas coaxial connector interfaces are a major failure point on standard proximity probe systems. They are susceptible to the ingress of oil and dirt resulting in intermittent connection through either improper installation or mechanical stresses. No cable length restrictions compared with standard proximity probes, which are restricted to typically 5m and 9m systems due to the required tuned circuit between the separate driver and the probe. The PRI series has no such restriction and can drive long cable distances (>500m) to the connecting equipment.

They are also more cost effective and easier to install as there is no driver, extension cable or associated driver housing, so capital and installation costs can be kept to a minimum. Utilising the same 8mm diameter tip as per API670 proximity probes the case body is available in the standard M10 and 3/8" UNF variants providing an easy retrofit option. There is no need for system matching, ensuring the right driver, extension cable and probe are assembled on the machine. The PRI is available in a standard 10m cable for direct termination to the connecting equipment or a local junction box.

Furthermore, as there is one probe for all machine measurement points there is no requirement to stock variants of extension cables and drivers.

The PRI probe is suitable for OEM applications as it offers a similar performance to existing systems on the market, but with all of the above advantages. Further details are available from www.sensonics.co.uk.