Skip to main content

Manual Slides

The IEF Werner range of manually adjusted slides for linear and rotary precision positioning

IEF Werner offers a wide range of highly accurate manually-adjusted slides which are suitable for linear and rotary positioning tasks in any industry where precision is critical.  With a wealth of experience, the IEF Werner manual adjusters offer both the quality and flexibility that manufacturers require.  These products present a multitude of opportunities across a variety of industry sectors.

The IEF Werner range of manually adjusted slides includes the following:-

1. Standard adjusters known as the domiLINE range
2. High-precision adjusters
3. Coordinate tables
4. Standard rotary adjusters
5. Rotary adjuster hollow shaft

 

Read our case study on how the compact manual slide system delivers long term reliability

domiLINE manual adjusters from IEF Werner for precision motion control

What applications are manual slides suitable for?

  • fine adjustment of sensors
  • 3D measurement
  • centric adjustment of lateral guides
  • focusing of pilot lights

Standard connecting and assembly plates allow for easy multi directional axis combinations to be achieved. Whilst the domiLINE unit is set to a standard length, the length may be customised to suit individual requirements thus providing precision positioning. The unit consists of an outer and inner slide which contain two high-quality V2A guide shafts. High load ratings and positive friction coefficients are achievable thanks to the strong surface-hardened guide surfaces. Inductive switches may be easily installed from a carriage width of 80mm. The stroke is produced as an outcome of the difference in length between the inner and outer slides.

As a result of this motion control technology the manual adjuster could prove invaluable in a vast number of applications. So whatever the industry, our manual adjusters offer precision automation to give you the edge in today’s competitive business environment.

domiLINE Standard Adjusters

The IEF Werner range of standard manual adjusters is known as the domiLINE Manual Adjuster range. This adjustment slide system offers manufacturers the flexibility to combine virtually any axis configuration that their application needs, including X, XY, XYZ and XYZ rotary fields. Consequently manufacturers can use the domiLINE standard adjuster to achieve total flexibility.

Additionally we offer 4 standard slide widths within our domiLINE range:-

  • domiLINE 30: width = 30 mm, pitch = 0.5 mm
  •  domiLINE 50: width = 50 mm, pitch = 1 mm
  • domiLINE 80: width = 80 mm, pitch = 1 or 2 mm
  • domiLINE 120: width = 120 mm, pitch = 1 or 2 mm

The standard manual slides come complete with spindle, they are pre-assembled and are available in standard strokes or in customer-specific strokes

 

domiLINE manual adjusters from IEF Werner for precision motion control

High-Precision Adjusters

  • For the highest precision, these slides are made of high-quality cast iron GG25 and can be customised to be nickel-plated or anodised aluminium.
  • The precision slides can have standard drilling patterns, T-slots, clamps, covers and wipers.
  • Complex multi-axis systems can be set up with mounting brackets.
  • Features of the precision adjusters are:
    • Different guide types are possible: roller, ball, needle, plastic-coated sliding guides, dovetail
    • Bespoke customer drilling patterns
    • Bespoke creation of STEP files
    • Sending the design data by e-mail in STEP format
IEF Werner high precision manual slide adjuster

Coordinate Tables

  • The IEF Werner coordinate tables have a high load capacity and are particularly suitable for drilling or milling applications.
  • The features of the coordinate tables are:
    • finely ground dovetail guides
    • Table surfaces correspondingly plane-parallel and with precise angles
    • Spindle hardened + ground, pitch accuracy 0.01 to 300 mm
    • Slotted bronze nut
    • Millimeter rulers with pointers
    • Large scale rings, adjustable and hard chrome plated
    • Fixing by means of clamping screws
    • High resilience
    • Material GG
    • Spindle supported axially and radially
    • Parallel infeed bars for safe guidance
IEF Werner coordinate tables have a high load capacity thanks to grey cast iron

Standard Rotary Adjusters

  • The manually operated rotary adjusters  are made of stainless steel. They have high-quality worm gears and are both precise and quick to adjust, thanks to the screw that is located at the side of the rotary plate.
  • Models include the MDV 55 & 80
  • The features of the Standard Rotary Adjusters are:
    • High reproducibility of the position
    • Quick adjustments
    • Reading accuracy of  0.5°
    • Compact design
IEF Werner Standard Rotary Adjuster suitable for heavy duty applications

Manual Rotary Adjuster with Hollow Shaft

  • These heavy duty rotary adjusters are made of stainless steel and aluminium.  They work with a high-quality worm gear and have a hollow shaft to allow for storage of tubes and cables.
  • The features of the hollow rotary adjusters are:
    • Possibility of backlash adjustment
    • Reading accuracy 0.5°
    • high reproducibility of the position
    • compact design
IEF Werner heavy duty rotary adjuster with hollow shaft
Call Us Today 01462 670 044
Email Us Now automation@raruk.com
Technical Support support@raruk.com