Ultra-miniature solenoid valve saves space, uses less energy
Posted to News on 5th Sep 2015, 14:03

Ultra-miniature solenoid valve saves space, uses less energy

A new ultra-miniature, HDI (high density interface) 2-port latching solenoid valve which is suitable for OEM applications that demand ultra-low energy consuming components that generate minimal heat and are as compact as possible, is now available from Lee Products. The trend for engineers and machine builders requiring innovative, energy-efficient components for compact and or portable battery powered instruments is growing so these magnetically latched solenoid valves are a good option.

Ultra-miniature solenoid valve saves space, uses less energy

The valves weigh less than 2.5g, measure just 27mm L × 7.1mm D which results in smaller manifolds. For example, the HDI 2-port, NC SOV offers a 0.300" (7.62mm) centre-to-centre spacing and so reduces the area needed for a given number of valves, which means less space and valuable cost savings. The close spacing also reduces the length of the connection passages from valve-to-valve inside the manifold, which is particularly important when fast system response time is critical.

Available as a plug-in or face-mount option, the valves have a low internal volume of 28uL for the plug-in and 34uL for the face mount which results in a reduced carryover and so allows for faster purging and throughput. They have an operating pressure range of inlet: Vac - 45 psig, a differential of 10 psid (max) and a leakage of less than 50 SuL/min @ 10 psid, Air 70degF (21degC).

They have an operating temperature range of 40degF to 120degF (4degC to 49degC) and require only momentary (10 to 30 ms) pulses of current to switch to and remain in each state with the polarity of voltage on each terminal pins controlling the switched position.

Other benefits are long-life expectancy (up to 250 million cycles on air depending on the seal material and application parameters), repeatability, high flow capabilities in a small package (450 Lohms) and exceptional sealing performance (max leakage of 50uL/min @ 10 psid on air) which equates to both weight and size savings.

Further details about the ultra-miniature HDI solenoid valves are available from www.leeproducts.co.uk.


Lee Products Ltd

3 High Street
Chalfont St Peter
SL9 9QE
UNITED KINGDOM

+44 (0)1753 886664

Bosch Rexroth Procter Machine Safety SICK (UK) LTD Pilz Automation Ltd Mechan Controls Ltd ABSSAC Ltd Kawasaki Robotics (UK) Ltd Rittal Ltd Murrelektronik Ltd PI (Physik Instrumente) Ltd M Buttkereit Ltd WEG (UK) Ltd Smartscan Ltd Leuze electronic Ltd Dold Industries Ltd FATH Components Ltd Heidenhain (GB) Ltd Machinesafe Compliance Ltd Servo Components & Systems Ltd AutomateUK Euchner (UK) STOBER Drives Ltd Spelsberg Els UK Ltd HARTING Ltd Phoenix Contact Ltd AutomateUK Micro Epsilon UK Limited Aerotech Ltd